Superstructures Archive - a2tec

Cone bearing 3-hole

am — Mon, 28 Apr 2025 10:36:09 +0000

Der Beitrag Cone bearing 3-hole erschien zuerst auf a2tec.

Cone bearing 4-hole

am — Mon, 28 Apr 2025 10:36:06 +0000

Der Beitrag Cone bearing 4-hole erschien zuerst auf a2tec.

V-bearing

am — Fri, 11 Apr 2025 08:58:16 +0000

V-bearings or Captive mounts are universally applicable bearing elements for machines, motors, pumps and systems. There are also tear-off-proof variants for mobile use.

Der Beitrag V-bearing erschien zuerst auf a2tec.

4-hole conical bearing

am — Fri, 11 Apr 2025 08:04:58 +0000

Der Beitrag 4-hole conical bearing erschien zuerst auf a2tec.

Metacone with stand

am — Wed, 09 Apr 2025 10:52:59 +0000

Der Beitrag Metacone with stand erschien zuerst auf a2tec.

3-hole conical bearing

am — Wed, 09 Apr 2025 10:01:31 +0000

Der Beitrag 3-hole conical bearing erschien zuerst auf a2tec.

2-hole conical bearing

am — Wed, 09 Apr 2025 09:23:33 +0000

Der Beitrag 2-hole conical bearing erschien zuerst auf a2tec.

Cone bearing 2-hole

am — Wed, 13 Nov 2019 08:03:19 +0000

Cone bearings are elastic bearings for engines, units and superstructures - in vehicles, rail vehicles and ships. Due to their design, cones can absorb large forces in the horizontal direction (e.g. braking forces), while at the same time providing the unit to be supported with good vibration damping.

Due to their design, conical bearings are always breakaway-proof and ideal for mobile applications.

Der Beitrag Cone bearing 2-hole erschien zuerst auf a2tec.

Screw insulators

admin — Sat, 27 Apr 2019 19:44:57 +0000

A screw insulator is used to decouple the component to be supported directly at the mounting. It is suitable for storage of pumps, electric motors and air conditioners. It is also suitable for absorbing thermal expansion in radiators.

The small version can also be used to store circuit boards or switch boxes.

We also offer all screw insulators in different Shore hardnesses.

Der Beitrag Screw insulators erschien zuerst auf a2tec.

Bushes

admin — Sat, 27 Apr 2019 19:32:06 +0000

Rubber-metal bushings are elastic bearings with a rubber layer between two pieces of pipe. Rubber-to-metal bushings are often referred to as ultra bushings, silent bushings, rubber bushings, silent blocks or rubber bushings.

Rubber-to-metal bushings can accommodate axial, radial, torsional and gimbal motion. They are ideally suited as an elastic connecting element to absorb movements, tolerances and installation stresses.

Der Beitrag Bushes erschien zuerst auf a2tec.